frontrunner_xt

Extra grip for exterior applications

frontrunner_xt

With all the features of Frontrunner, Frontrunner XT has an extra aggressive, deep etched tread to give additional underfoot traction in outdoor applications and to remove the heaviest amounts of undershoe dirt and debris.

Frontrunner XT has therefore been successfully used where walkways and entrances are prone to becoming slippery and hazardous in wet conditions, and in particular on hardwood decking, bridges and general outdoor pedestrian areas.

By installing this high quality product, outdoor premises have been able to remain open when the inclement weather of winter months might otherwise have forced them to close. The additional slip resistance of Frontrunner XT therefore keeps walkways and entrances safer underfoot in all year round conditions and makes claims from slips and trips less likely.


Frontrunner XT Line drawing

Frontrunner XT product shot

frontrunner xt line drawing

frontrunner xt product shot


Standard colours:

Frontrunner XT matting black shot Frontrunner XT matting grey shot
Dark Grey Black

   Click on the picture to zoom.


Product Height mm (in) Standard roll sizes
Frontrunner XT 14 (9/16") 10m x 60cm
(33' x 2')
10m x 91cm
(33' x 3')
5m x 120cm
(16'6" x 3'11")

Test Result for Slip Resistance and Fluid Drainage
Standard Result
DIN 51130 R12, V10

Surface mounted ancillaries Picture Description
Aluminium ramp aluminium ramp Supplied with fixing screws and plus for permanent fixing.
Snap Track snap track Integral welded flexible vinyl "Snap Track". Available in 14mm and 10mm heights. Supplied in 1,8m length (6') + welding paste.
Colour: Dark Grey
Connector clips connector clips Dual Purpose (pack of 10)
Flexible PVC edging flexible pvc 6cm edgingflexible pvc edging Standard profile rolls, 10cm or 6cm x 10.1m (4", 3" or 2" x 33'). 2 rolls per pack + welding paste.
Colours: Dark Grey or Black

Recessed ancillaries Picture Description
Edge 'R' aluminium ramp For left and right extremities of well to cap and secure ends of 14mm/10.5mm matting.
Edge 'H' connector clips Used as “an invisible divider” for front to back installations of 14mm/10.5mm matting.
Edge 'L' flexible pvc edging For circular door and nonrectangular installations of 14mm matting.
Edge 'R' aluminium ramp For left and right extremities of well to cap and secure ends of 14mm/10.5mm matting.
Edge 'U' snap track A front to back frame or divider used with 14mm/10.5mm matting.
Edge 'T/TL' connector clips Frames of different widths used as dividers for large left to right installations of 14mm matting.
Edge 'J' flexible pvc edging For left and right extremities of well to cap and secure ends of 14mm matting when against a wall.



 

frontrunner xt gallery
key features
slip_resistance wear_resistance clean_dry fluid_drainage fatigue_reduction
additional benefits
heel_proof indoor_outdoor roll_format contours easily_cut
why choose frontrunner xt?
at a glance:
case studies
pdficon St Laurent Blangy, France
pdficon Lakeshore development, Bristol
pdficon Raiffeisen Bank, Switzerland


product links
Link to Frontrunner product site

product documents
pdficon Frontrunner Product Data Sheet


Unsure which Frontrunner Entrance Flooring solution is right for you? Have a look at our comparison chart here.







QR