Frontrunner SB

Solid-backed entrance matting designed for internal and external areas with no mat well.

Frontrunner SB is a low-profile, solid-backed mat that can be loose laid to integrate easily with your existing floor coverings.


Simply roll out, cut to fit and lay within your existing carpet tiles or luxury vinyl tiles – no mat well needed. You can also place directly on your current floor with ramped PVC edges to create a slip-resistant walkway.

The mat's ribbed pattern scrapes shoes and wheels clean, while the grid traps and collects any debris, helping to reduce the amount of dirt walked into the building.

Wheel and heel proof with excellent rolling load endurance, it's perfect for commercial buildings and shopping centers with high traffic.

  • Seamless integrationComes in 33' rolls or order a custom size
  • Simple installationSimply roll out and cut to fit on site; contours to uneven surfaces
  • Easy to maintainLight to handle; no special cleaning tools needed

Also in the SB range is SB+, solid-backed entrance matting with carpet inserts for maximum moisture removal.

FeaturesBenefits
Textured Surface
Etched pattern
Slip Resistant
Certified slip resistant (DIN 51130: R11, ASTM C1028: 0.6/0.6)
One Layer Construction
One-layer, hollow construction
Lightweight
Light to handle
Ribbed Surface
Ribbed vinyl pattern with solid backing
Easy Installation
Easy to install, no need for recessed mat well
Elevated Surface
1⁄4” (6mm) grid height
Loose Lay
Loose lay or adhere to subfloor
Close Mesh Grid
Close mesh grid
Wheel And Heel Proof
Wheel and heel proof

Available colors:

Black
Gray
Frontrunner SB
Height1/4" (6.5mm)
Standard roll options33' x 3'3’ (10 x 1m)
Weight1.3lb/sq.ft (6.3 kg/m2)
AcousticExcellent sound absorption
ChemicalResistant to most acids, alkalines and oils. You can read more about specific chemical resistances by downloading this information sheet.
CompositionFlexible Polyvinyl Chloride (PVC)
EnvironmentFrontrunner SB is 100% recyclable. Our Frontrunner Entrance matting System qualifies for LEED IEQ Credit 5, and when produced in black or gray, Frontrunner may also qualify for LEED MR Credit 4. We don’t use any substances included in the SVHC list under REACH in any of our matting products.
FireEN ISO 13501-1:2007-Cfl-S1, ASTM E648 – Class 2
ReversionThermoplastic shrinkage can result in size reductions up to 2%. This may be accelerated in hot environments. You can read more about the causes of shrinkage by downloading this information sheet.
Rolling loadASTM F 2753: No apparent damage to the vinyl portion of the system after 1,000 cycles at 500lbs
Slip resistanceDIN 51130: R11, V10
ASTM F C1028 - Dry/Wet: 0.6/0.6
ThermalDesigned to function at temperatures from -9°F and up to +140°F. Slight size variation may occur at temperature extremes.
UV lightResistant to PVC degradation
WarrantyThree years. Visit our policies page for more information about warranties.

PVC edging (SB / SB+)

Supplied in rolls of 197" (60m) length with cold welding paste. Comes in black and dark gray. Size: 1/4" x 1" x 197' (6.5mm x 30mm x 60m)

PVC joining strip (SB / SB+)

Can be welded to join rolls end-to-end or side-to-side when doing large installations. Comes in black. Size: 1/8" x 11'9" (3.5mm x 3.6m)

Frontrunner SB's one-piece construction means installation is simple


There are two ways to install SB: you can adhere directly to the floor, or loose lay modules with PVC edging. For large installations with medium to high traffic, we recommend adhering your mat.

Watch the videos below for a step-by-step installation guide, or download the installation instructions here.

Keeping Frontrunner SB looking good is easy

  • Light to handle
  • Simply roll or lift to clean
  • No special tools needed
  • Quick and easy to clean because of the solid backing


Watch our step-by-step guide to daily, weekly and monthly cleaning below or download the cleaning instructions here.

Looking for dirt and moisture removal? Try SB+, a solid-backed entrance mat with carpet inserts: