Heronair Photoluminescent: Matting to illuminate escape routes | Plastex

Heronair Photoluminescent


Slip-resistant matting with a photoluminescent band for illuminating escape routes.

Certified slip resistant with a light-emitting band running down the center, Heronair Photoluminescent glows in the dark, making it the perfect matting to mark escape routes along walkways in case of lighting failure.


Made from flexible PVC, it's easy to cut on site and contours to uneven surfaces, making it ideal for marking exit pathways on surfaces that aren't completely smooth, like grating or checker plate patterns. And because it's made from non-porous PVC, it's impermeable to fluids and provides excellent drainage.

Flexible format

Comes in 33' rolls

Simple installation

Easy to cut on site; contours to uneven surfaces

Easy to maintain

Light to handle, no special cleaning tools needed

Features + benefits

Features

Textured Surface

Etched pattern

Tubular Construction

Two-layer, tubular construction

Made From Non Porous PVC

Made from non-porous PVC

Made From Flexible PVC

Made from flexible PVC

Photoluminescent Band

Photoluminescent band

Benefits

Slip Resistant

Certified slip resistant (DIN 51130: R11, ASTM 1677: 0.6/0.6)

Excellent Drainage

Excellent drainage (DIN 51130: V10)

Chemical Oil And Acid Resistant

Chemical, oil and acid resistant

Contours To Uneven Surfaces

Loose lay, contours to uneven surfaces

Ideal For Marking Escape Routes

Ideal for illuminating escape routes

Standard sizes
Heronair Photoluminescent
Height3/8" (10mm)
Standard roll options33' x 2' (10 x 0.6m)
33' x 3' (10 x 0.9m)
Weight0.9 lbs/sq.ft (4.5 kg/m2)
Technical info
AcousticExcellent sound absorption
ChemicalResistant to most acids, alkalines and oils. You can read more about specific chemical resistances by downloading this information sheet.
CompositionFlexible Polyvinyl Chloride (PVC)
EnvironmentHeronair Photoluminescent is 100% recyclable. We don’t use any substances included in the SVHC list under REACH in any of our matting products.
FireDIN 4102 Part 1 – Classification B2
Hygiene
Made from non-porous PVC that’s naturally resistant to bacteria growth.
ReversionThermoplastic shrinkage can result in size reductions up to 2%. This may be accelerated in hot environments. You can read more about the causes of shrinkage by downloading this information sheet.
Slip resistanceASTM F 1677 - Dry/Wet: 0.6/0.54
DIN 51130: R11, V10
ThermalDesigned to function at temperatures from -9°F and up to +140°F. Slight size variation may occur at temperature extremes.
UV lightResistant to PVC degradation
WarrantyTwo years. Visit our policies page for more information about warranties.
Ancillaries
PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 10.1m (33’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Installation

Heronair Photoluminescent's one-piece construction means installation is simple

  • Comes in 33' rolls
  • Easy to cut to fit on site
  • Contours to uneven surfaces

Cleaning

Keeping Heronair Photoluminescent looking good is easy

  • Light to handle
  • Simply roll or lift to clean
  • No special cleaning tools needed
  • Easy to clean with a high pressure hose

Seen something you like?


We’re always here to help. Fill out the below form and we’ll be in touch within 48 hours.

SIMILAR PRODUCTS YOU MAY LIKE


Subscribe to our

Newsletter

Sign up to our newsletter for updates, news and events

You’ve added ${cartTotal} sample