Frontrunner plus 05

Gateway Plus


Internal entrance matting with carpet inserts for thorough moisture removal.

Slip resistant, wheel-proof and heel-proof, Gateway 14 Plus (Frontrunner Plus) is an absorbent commercial entrance carpet mat specifically designed to stop dirt and moisture in its tracks.

The mat's embossed tread pattern scrapes shoes and wheels clean, while absorbent entrance matting carpet inserts remove and dry any associated moisture. Not only does this reduce cleaning demands, it also expands the life of your original floor finishes and can keep your building interior looking stylish for longer. These qualities make it perfect for use in commercial entrances, especially for businesses and shopping centres with high foot traffic.

Choose from 50 colour and style combinations that can be surface-mounted or placed in an entrance mat well – you can even add a logo panel for personal branding.

Seamless integration

Choose from modules with ramped PVC edging, rolls in standard widths and 10m lengths, or order a custom size

Simple installation

One-piece construction means you can cut to fit on site, with no previous site visits needed

Easy to maintain

Simply roll or lift to clean, no special tools needed

Features + benefits

Features


Diamond Cut Pattern

Embossed pattern

Open Grid

Two layer open-grid construction

Absorbent Inserts

Absorbent carpet inserts

Close Mesh Grid

Close mesh grid

Comes In Rolls And Modules

Comes in 10m (33') rolls or modules

Benefits


High Soil Removal

Slip resistant, high soil removal

Excellent Drainage

Excellent drainage

Removes Moisture

Maximum moisture removal

Wheel And Heel Proof

Heel and wheel proof

Easy Installation

Seamless installation

Standard sizes
Gateway 14 PlusGateway 10 Plus
Height14-16mm (9/16" – 5/8")10.5-12mm (13/32" - 1/2")
Standard roll options10 x 0.6m (33' x 2’)10 x 0.6m (33' x 2')
10 x 0.91m (33' x 3’)10 x 0.91m (33' x 3')
5 x 1.2m (16'6" x 4’)5 x 1.2m (16'6" x 4')
Standard module options0.8 x 1.2m (2'7" x 4’)
1 x 1.5m (3'3" x 4’11")
1.1 x 2m (3'7" x 6’7")
Weight10.5 kg/m2 (2lbs/sq.ft)8.7kg/m2 (1.8lbs/sq.ft)


Surface modules are supplied with factory fitted PVC ramped edging to four sides.

Technical info

PVC GRID:

AcousticExcellent sound absorption.
ChemicalResistant to most acids, alkalines and oils. You can read more about specific chemical resistances by downloading this information sheet.
CompositionFlexible Polyvinyl Chloride (PVC).
EnvironmentWe don’t use any substances included in the SVHC list under REACH in any of our matting products.
FireGateway 14 Plus: EN ISO 13501-1:2007-Cfl-S1, ASTM E648 – Class 1
Gateway 10 Plus: EN ISO 13501-1:2007-Cfl-S2
ReversionThermoplastic shrinkage can result in size reductions up to 2%. This may be accelerated in hot environments. You can read more about the causes of shrinkage by downloading this information sheet.
Slip resistanceASTM E303 Dry/Wet with lines along–lines across 74-93 / 48-75
ThermalDesigned to function at temperatures from -23°C and up to +60°C. Slight size variation may occur at temperature extremes.
UV lightResistant to PVC degradation.
WarrantyGateway 14 Plus: three years. Gateway 10 Plus: two years. Visit our policies page for more information about warranties.


ABSORBENT INSERTS (ZENO 600 SERIES):

Wear classificationEN 1307 - 33, Commercial heavy
Pile materialECONYL® , 100% regenerated polyamide BCF
Tuft base100% regenerated non woven polyester Colback™
Phthalate Free backingWaterproof Comfort™ vinyl
Total heightEN 1765 ± 8.7 mm
Pile heightEN 1766 ± 6.7 mm
Total weightEN 8543 ± 4260 g/m²

Pile yarn weight

± 820 g/m²
Pile density± 0,127 g/cm³
FireEN ISO 13501-1:2007 Cfl-S1
Suitable for castor chairsEN 985 A, intensive use r=2.8
Colours10
Ancillaries

For surface-mounted installations: Gateway 14 Plus

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 15mm, W: 100mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminum edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminum and powder coated yellow. Size: 14mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")

Connector clips: side-to-side (H: 14mm)

Connector clips: side-to-side (H: 14mm)


For joining sections of matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

For recessed installations: Gateway 14 Plus

R frame (H: 14mm)

R frame (H: 14mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 12mm (9/16" x 15/32")

J frame (H: 18mm)

J frame (H: 18mm)


Installing Gateway against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length. Comes in dark grey and black. Size: 18mm x 60mm (11/16" x 2 3/8")

T frame (H: 14mm)

T frame (H: 14mm)


You can use a T frame (27mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black

TL frame (H: 14mm)

TL frame (H: 14mm)


You can use a T/L frame (55mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum

L frame (H: 15mm)

L frame (H: 15mm)


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 15mm x 2.7m length (5/8" x 8')

U section (H: 14mm)

U section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 19mm (9/16" x 3/4")

H section (H: 10mm)

H section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 3m (12') length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 14mm x 13mm (9/16" x 1/2").

For surface-mounted installations: Gateway 10 Plus

Aluminum ramp (H:10mm)

Aluminum ramp (H:10mm)


Supplied in sections of 2m (6'6") length , optional Tapcon Concrete Screws are available. Comes in anodized aluminum. Size: 10mm x 45mm x 2m (3/8" x 1 13 /16" x 6'6")

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

Connector clips: side-to-side (H: 10mm)

Connector clips: side-to-side (H: 10mm)


For joining sections of low profile matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

For recessed installations: Gateway 10 Plus

Aluminum mat divider (H:10mm)

Aluminum mat divider (H:10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need an aluminum mat divider to secure the different sections together. Mat dividers can also be used to divide the overall vestibule into smaller sections, or as a perimeter frame in recessed applications. Supplied in sections of 3m (10') length. Optional “spike” concrete anchors are available. Comes in aluminum. Size: 10mm x 18mm x 3m (3/8" x 11/16" x 10’)

R frame (H: 10mm)

R frame (H: 10mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 10mm x 12mm (3/8" x 15/32")

H section (H: 10mm)

H section (H: 10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 3.6m (12') length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 10mm x 13mm (3/8" x 1/2")

U section (H: 10mm)

U section (H: 10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 10mm x 18mm (3/8" x 11/16")

Z frame (H: 10mm)

Z frame (H: 10mm)


Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 3.6m (12') length with fixing screws and plugs. Comes in anodised aluminum. Size: 10mm x 24mm (3/8" x 15/16")

Installation
Cleaning

Keeping Gateway 14 Plus looking good is easy

  • Reduces cleaning intervals
  • Simply roll or lift to clean
  • No special tools needed
  • Easy to vacuum

Watch our step-by-step guide to daily, weekly and monthly cleaning or download the cleaning instructions below


Custom logos

We can incorporate a logo panel on any recessed or surface mounted mats.
The logo runs the width of the mat well and can either be 30cm or 45cm tall.


Get in touch
with a member of our team to find out more.

Frontrunner Plus Custom 01
Frontrunner Plus Custom 02
Frontrunner Plus Custom 03
BIM objects

Download our BIM objects in both Revit and IFC file types

Interested in Gateway Plus


We’re always here to help. Fill out the below form and we’ll be in touch within 48 hours.

Similar products you may like


Also ideal for removing moisture in high traffic entranceways:

Subscribe to our

Newsletter

Sign up to our newsletter for updates, news and events

You’ve added ${cartTotal} sample