|Standard roll options||10 x 0.6m (33’ x 2’)|
|10 x 0.91m (33’ x 3’)|
|Acoustic||Excellent sound absorption properties.|
|Chemical||Resistant to most acids, alkalines and oils. You can read more about specific chemical resistances by downloading this information sheet.|
|Composition||Flexible Polyvinyl Chloride (PVC)|
|Environment||Floorline is 100% recyclable. We don’t use any substances included in the SVHC list under REACH in any of our matting products.|
Fire||DIN 4102 Part 1- Classification B2. BS 2782 Part 1, method 140A: 1992 (ISO 1210: 1992)|
Made from non-porous PVC that’s naturally resistant to bacteria growth. Incorporates anti-microbial and anti-fungal additives for continuous hygiene.|
|Reversion||Thermoplastic shrinkage can result in size reductions up to 2%. This may be accelerated in hot environments. You can read more about the causes of shrinkage by downloading this information sheet.|
ASTM F 1677 - Dry/Wet: 1.0/0.8|
DIN51130: R11, V10
DIN51097: Classification C
|Thermal||Designed to function at temperatures from -23°C and up to +60°C. Slight size variation may occur at temperature extremes.|
|UV light||Resistant to PVC degradation. The red colour isn't colourfast in direct sunlight.|
|Warranty||One year. Visit our policies page for more information about warranties.|
Floorline's one-piece construction means installation is simple
- Comes in 10m rolls
- Easy to cut to fit on site
- No special tools or previous site visits needed
- Contours to uneven surfaces
Regular cleaning will maintain both the effectiveness and lifespan of Floorline.
The matting has both anti-bacterial and anti-fungal additives to protect against fungal and bacterial contamination, but regular cleaning is also recommended to remove light grease and oils, food fat, wax and acrylic polishes.
Check the matting is free from any loose items like litter and clothing fibres.
Regular hand cleaning should be done as required, using an alkaline cleaning fluid as per the manufacturer's instructions. The matting can be cleaned in position – simply apply the cleaning solution with a sprayer or mop and allow to penetrate any grease or dirt. You can then use a stiff deck brush to work the cleaning fluid into the surface dirt. Allow to soak before rinsing with clean water.
How frequently you machine clean will depend on how much traffic the area gets. Spray the surface with the alkaline solution and then, using a cylindrical brush machine, clean the top surface in the direction of the top ribs. If there's an etched pattern on the top ribs where dirt can easily collect, make additional cross passes to ensure a thorough clean.
If the underside of the matting also needs a clean, roll it up and then roll back out, leaving the underside facing upwards. Repeat the spray and above cleaning instructions.
Any type of steam cleaner can be used. Good results have been obtained with nozzle pressure of approximately 6894.8 kN/m² (1000 lbs p.s.i.) and water temperature of approximately 212°F. Cleaning fluid should be diluted according to the manufacturer's recommendation.