|Standard tile size||33 x 33cm (13" x 13")|
|Weight||4.5 kg/m2 (0.82 lb/sq.ft)|
|Acoustic||Excellent sound absorption properties.|
|Composition||Moulded Ethylene Vinyl Acetate (EVA)|
|Hygiene||Made from non-porous 100% Virgin EVA, which inhibits the growth of bacteria.|
BPR (EU Biocidal Products Regulation 528/2012): Contains Biocidal Products for improved performance.
Anti-bacterial additive: Test JIS Z 2801:2000
Anti-fungal additive: Test method ASTM G21-09
|Slip resistance||DIN 51097: C|
|Warranty||Four years. Visit our policies page for more information about warranties.|
EVA Herontile edging
Snap-on edging supplied in 33cm (13") lengths. Comes in dark grey and ocean blue. Size: 15mm x 7cm x 33cm (5/8" x 2 3/4" x 13")
Herontile's interlocking system means installation is simple
- Made from flexible EVA
- Supplied in tiles for quick installation
- Easy to cut to fit on site
Regular cleaning will maintain both the effectiveness and lifespan of Herontile.
Herontile has both anti-bacterial and anti-fungal additives to protect against fungal and bacterial contamination, but regular cleaning is also recommended to remove light grease and oils, food fat, wax and acrylic polishes.
Check the tiles are free from any loose items like litter and clothing fibers.
Regular hand cleaning should be done as required, using an alkaline cleaning fluid as per the manufacturer's instructions. The tiles can be cleaned in position – simply apply the cleaning solution with a sprayer or mop and allow to penetrate any grease or dirt. You can then use a stiff deck brush to work the cleaning fluid into the surface dirt. Allow to soak before rinsing with clean water.
If you're deep cleaning or cleaning the flooring below, the tiles should be lifted up. They shouldn't be folded or pulled, as this will damage them over time.
How frequently you machine clean will depend on how much traffic the area gets. Spray the surface with the alkaline solution and then, using a cylindrical brush machine, clean the top surface in the direction of the top ribs. If there's an etched pattern on the top ribs where dirt can easily collect, make additional cross passes to ensure a thorough clean.
Any type of steam cleaner can be used. Good results have been obtained with nozzle pressure of approximately 6894.8 kN/m² p.s.i. (1000 lbs) and water temperature of approximately 100°C. Cleaning fluid should be diluted according to the manufacturer's recommendation.