Plastex Ancillaries

Ancillaries


Browse the available ancillaries for our range of products

C

arrow_left [#335] Created with Sketch.
Crossgrip 20/20

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

Connector clips: dual purpose (H: 14mm)

Connector clips: dual purpose (H:14mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10.

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

Crossgrip PVC

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 14mm, W: 100mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminium edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium, powder coated yellow. Size: 15mm x 45mm x 2m (5/8" x 1 13/16" x 6'6")

Connector clips: dual purpose (H: 14mm)

Connector clips: dual purpose (H:14mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10.

Connector clips: side-to-end (H: 14mm)

Connector clips: side-to-end (H: 14mm)


For joining sections of matting together side-to-end. Supplied in packs of 10

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

Small floor hook (H: 14mm)

Small floor hook (H: 14mm)


For securing sections of the matting to the floor. Supplied in packs of 20 with screws and plugs.

Crossline Covid-19

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33’) length with cold welding paste. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8” x 2” x 33’)

PVC snap track (H: 10mm)

PVC snap track (H: 10mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in dark grey. Size: 10.5mm x 2.5m (13/32”x 8’2”)

Connector clips: dual purpose (H: 14mm)

Connector clips: dual purpose (H: 14mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

F

arrow_left [#335] Created with Sketch.
Firmagrip

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 14mm, W: 100mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminium edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium and powder coated yellow. Size: 14mm x 45mm x 2m (5/8" x 1 13 /16" x 6'6")

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

Connector clips: side-to-side (H: 14mm)

Connector clips: side-to-side (H: 14mm)


For joining sections of matting together side-to-side. Supplied in packs of 10

Flexigrid

Aluminium edging (H: 20mm)

Aluminium edging (H: 20mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium. Size: 20mm x 50mm x 2m (7/8” x 2 3/16” x 6’6”)

Ancillaries Connector Clips Dual Purpose (H: 25mm)

Connector clips: dual purpose (H: 25mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10.

G

arrow_left [#335] Created with Sketch.
Gateway 10

For surface-mounted installations: Gateway 10

Aluminum ramp (H:10mm)

Aluminum ramp (H:10mm)


Supplied in sections of 2m (6'6") length , optional Tapcon Concrete Screws are available. Comes in anodized aluminum. Size: 10mm x 45mm x 2m (3/8" x 1 13 /16" x 6'6")

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

Connector clips: side-to-side (H: 10mm)

Connector clips: side-to-side (H: 10mm)


For joining sections of low profile matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

For recessed installations: Gateway 10

Aluminum mat divider (H:10mm)

Aluminum mat divider (H:10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need an aluminum mat divider to secure the different sections together. Mat dividers can also be used to divide the overall vestibule into smaller sections, or as a perimeter frame in recessed applications. Supplied in sections of 3m (10') length. Optional “spike” concrete anchors are available. Comes in aluminum. Size: 10mm x 18mm x 3m (3/8" x 11/16" x 10’)

R frame (H: 10mm)

R frame (H: 10mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 10mm x 12mm (3/8" x 15/32")

Z frame (H: 10mm)

Z frame (H: 10mm)


Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 3.6m (12') length with fixing screws and plugs. Comes in anodised aluminium. Size: 10mm x 24mm (3/8" x 15/16")

H section (H: 10mm)

H section (H: 10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3.6m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 3/8" x 1/2" (10mm x 13mm).

For surface-mounted installations: Gateway 14

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 14mm, W: 100mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminium edging (H: 15mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium and powder coated yellow. Size: 15mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")

Connector clips: side-to-side (H: 14mm)

Connector clips: side-to-side (H: 14mm)


For joining sections of matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

For recessed installations: Gateway 14

R frame (H: 14mm)

R frame (H: 14mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 14mm x 12mm (9/16" x 15/32")

H section (H: 10mm)

H section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3.6m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 9/16" x 1/2" (14mm x 13mm)

J frame (H: 18mm)

J frame (H: 18mm)


Installing Gateway against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length. Comes in dark grey and black. Size: 18mm x 60mm (11/16" x 2 3/8")

T frame (H: 14mm)

T frame (H: 14mm)


You can use a T frame (27mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black

TL frame (H: 14mm)

TL frame (H: 14mm)


You can use a T/L frame (55mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium

L frame (H: 15mm)

L frame (H: 15mm)


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 15mm x 2.7m length (5/8" x 8')

U section (H: 10mm)

U section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 14mm x 19mm (9/16" x 3/4")

Gateway Brush

For surface-mounted installations

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 14mm, W: 100mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminum edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminum and powder coated yellow. Size: 14mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

For recessed installations

R frame (H: 14mm)

R frame (H: 14mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 12mm (9/16" x 15/32")

H section (H: 10mm)

H section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 14mm x 13mm (9/16" x 1/2").

J frame (H: 18mm)

J frame (H: 18mm)


Installing Gateway against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length. Comes in dark grey and black. Size: 18mm x 60mm (11/16" x 2 3/8")

T frame (H: 14mm)

T frame (H: 14mm)


You can use a T frame (27mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black

TL frame (H: 14mm)

TL frame (H: 14mm)


You can use a T/L frame (55mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum

L frame (H: 15mm)

L frame (H: 15mm)


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 15mm x 2.7m length (5/8" x 8')

U section (H: 14mm)

U section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 19mm (9/16" x 3/4")

Gateway Brush Wide

For surface-mounted installations

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 14mm, W: 100mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminum edging (H: 15mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminum and powder coated yellow. Size: 15mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

For recessed installations

H section (H: 10mm)

H section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 14mm x 13mm (9/16" x 1/2").

R frame (H: 14mm)

R frame (H: 14mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 12mm (9/16" x 15/32")

J frame (H: 18mm)

J frame (H: 18mm)


Installing Gateway against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length. Comes in dark grey and black. Size: 18mm x 60mm (11/16" x 2 3/8")

T frame (H: 14mm)

T frame (H: 14mm)


You can use a T frame (27mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black

TL frame (H: 14mm)

TL frame (H: 14mm)


You can use a T/L frame (55mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum

L frame (H: 15mm)

L frame (H: 15mm)


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 15mm x 2.7m length (5/8" x 8')

U section (H: 14mm)

U section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 19mm (9/16" x 3/4")

Gateway Plus

For surface-mounted installations: Gateway 14 Plus

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 15mm, W: 100mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminum edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminum and powder coated yellow. Size: 14mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")

Connector clips: side-to-side (H: 14mm)

Connector clips: side-to-side (H: 14mm)


For joining sections of matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

For recessed installations: Gateway 14 Plus

R frame (H: 14mm)

R frame (H: 14mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 12mm (9/16" x 15/32")

J frame (H: 18mm)

J frame (H: 18mm)


Installing Gateway against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length. Comes in dark grey and black. Size: 18mm x 60mm (11/16" x 2 3/8")

T frame (H: 14mm)

T frame (H: 14mm)


You can use a T frame (27mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black

TL frame (H: 14mm)

TL frame (H: 14mm)


You can use a T/L frame (55mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum

L frame (H: 15mm)

L frame (H: 15mm)


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 15mm x 2.7m length (5/8" x 8')

U section (H: 14mm)

U section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 19mm (9/16" x 3/4")

H section (H: 10mm)

H section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 3m (12') length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 14mm x 13mm (9/16" x 1/2").

For surface-mounted installations: Gateway 10 Plus

Aluminum ramp (H:10mm)

Aluminum ramp (H:10mm)


Supplied in sections of 2m (6'6") length , optional Tapcon Concrete Screws are available. Comes in anodized aluminum. Size: 10mm x 45mm x 2m (3/8" x 1 13 /16" x 6'6")

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

Connector clips: side-to-side (H: 10mm)

Connector clips: side-to-side (H: 10mm)


For joining sections of low profile matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

For recessed installations: Gateway 10 Plus

Aluminum mat divider (H:10mm)

Aluminum mat divider (H:10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need an aluminum mat divider to secure the different sections together. Mat dividers can also be used to divide the overall vestibule into smaller sections, or as a perimeter frame in recessed applications. Supplied in sections of 3m (10') length. Optional “spike” concrete anchors are available. Comes in aluminum. Size: 10mm x 18mm x 3m (3/8" x 11/16" x 10’)

R frame (H: 10mm)

R frame (H: 10mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 10mm x 12mm (3/8" x 15/32")

H section (H: 10mm)

H section (H: 10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 3.6m (12') length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 10mm x 13mm (3/8" x 1/2")

U section (H: 10mm)

U section (H: 10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 10mm x 18mm (3/8" x 11/16")

Z frame (H: 10mm)

Z frame (H: 10mm)


Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 3.6m (12') length with fixing screws and plugs. Comes in anodised aluminum. Size: 10mm x 24mm (3/8" x 15/16")

Gateway SB

PVC edging (SB / SB+)

PVC edging (SB / SB+)


Supplied in rolls of 60m (197") length. One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark grey. Size: 6.5mm x 30mm x 60m (1/4" x 1" x 197')

PVC joining strip (SB / SB+)

PVC joining strip (SB / SB+)


Can be welded to join rolls end-to-end or side-to-side when doing large installations. Comes in black. Size: 3.5mm x 3.6m (1/8" x 11'9")

Gateway SB+

PVC edging (SB / SB+)

PVC edging (SB / SB+)


Supplied in rolls of 60m (197") length. One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark grey. Size: 6.5mm x 30mm x 60m (1/4" x 1" x 197')

PVC joining strip (SB / SB+)

PVC joining strip (SB / SB+)


Can be welded to join rolls end-to-end or side-to-side when doing large installations. Comes in black. Size: 3.5mm x 3.6m (1/8" x 11'9")

Gateway XT

For surface-mounted installations: Gateway 14 XT

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

Aluminium edging (H: 14mm)

Aluminum edging (H: 15mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminum and powder coated yellow. Size: 15mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")

Connector clips: side-to-side (H: 14mm)

Connector clips: side-to-side (H: 14mm)


For joining sections of matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

For recessed installations: Gateway 14 XT

H section (H: 10mm)

H section (H: 14 mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 14mm x 13mm (9/16" x 1/2").

R frame (H: 14mm)

R frame (H: 14mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 12mm (9/16" x 15/32")

J frame (H: 18mm)

J frame (H: 18mm)


Installing Gateway against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length. Comes in dark grey and black. Size: 18mm x 60mm (11/16" x 2 3/8")

T frame (H: 14mm)

T frame (H: 14mm)


You can use a T frame (27mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black

TL frame (H: 14mm)

TL frame (H: 14mm)


You can use a T/L frame (55mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum

L frame (H: 15mm)

L frame (H: 15mm)


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 15mm x 2.7m length (5/8" x 8')

U section (H: 14mm)

U section (H: 14mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 14mm x 19mm (9/16" x 3/4")

For surface-mounted installations: Gateway 10 XT

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

Connector clips: side-to-side (H: 10mm)

Connector clips: side-to-side (H: 10mm)


For joining sections of low profile matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

For recessed installations: Gateway 10 XT

R frame (H: 10mm)

R frame (H: 10mm)


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 10mm x 12mm (3/8" x 15/32")

U section (H: 10mm)

U section (H: 10mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminum, powder coated dark grey and black. Size: 10mm x 18mm (3/8" x 11/16")

Z frame (H: 10mm)

Z frame (H: 10mm)


Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 3.6m (12') length with fixing screws and plugs. Comes in anodised aluminum. Size: 10mm x 24mm (3/8" x 15/16")

H section (H: 10mm)

H section (H: 10 mm)


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 3.6m (12') length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 10mm x 13mm (3/8" x 1/2").

H

arrow_left [#335] Created with Sketch.
Heronair

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

Connector clips: dual purpose (H: 14mm)

Connector clips: dual purpose (H: 14mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Heronair Photoluminescent

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

Connector clips: dual purpose (H: 14mm)

Connector clips: dual purpose (H: 14mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Herongripa

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

Aluminium edging (H: 14mm)

Aluminium edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium and powder coated yellow. Size: 14mm x 45mm x 2m (5/8" x 1 13 /16" x 6'6")

Small floor hook (H: 14mm)

Small floor hook (H: 14mm)


For securing sections of matting to the floor. Supplied in packs of 20 with screws and plugs

Heronrib

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

Connector clips: dual purpose (H: 14mm)

Connector clips: dual purpose (H: 14mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

Small floor hook (H: 14mm)

SMALL FLOOR HOOK (H: 14MM)


For securing sections of the matting to the floor. Supplied in packs of 20 with screws and plugs.

Herontile

EVA Herontile edging

EVA Herontile edging


Snap-on edging supplied in 33cm (13") lengths. Comes in dark grey and ocean blue. Size: 15mm x 7cm x 33cm (5/8" x 2 3/4" x 13")

HVD

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33').

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 14mm, W: 100mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminium edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium and powder coated yellow. Size: 14mm x 45mm x 2m (5/8" x 1 13 /16" x 6'6")

Connector clips: dual purpose (H: 14mm)

Connector clips: dual purpose (H: 14mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

Small floor hook (H: 14mm)

Small floor hook (H: 14mm)


For securing sections of matting to the floor. Supplied in packs of 20 with screws and plugs

Large floor hooks (H: 14mm)

Large floor hooks (H: 14mm)


For securing sections of matting to the floor. Supplied in packs of 10 with screws and plugs

P

arrow_left [#335] Created with Sketch.
PennyLok

PennyLok edging (male)

PennyLok edging (male)


Supplied in 50cm (1'8") lengths. Comes in black and yellow. Size: 12mm x 50mm x 500mm (1/2" x 2" x 1'8")

PennyLok edging (female)

PennyLok edging (female)


Supplied in 50cm (1'8") lengths. Comes in black and yellow. Size: 12mm x 50mm x 500mm (1/2" x 2" x 1'8")

PillogriD

Ancillaries Pillogrid Bespoke Size Panels

Bespoke panels


PillogriD is available in rolls for on site fabrication and installation. Alternatively, we can supply factory fabricated panels in one piece that allows for quick and easy unrolling and installation. Due to shipping and handling restrictions, the maximum dimension of these panels is 5m (16') on the shorter side

Plastex Grid

Aluminium edging (H: 25mm)

Aluminium edging (H: 25mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium. Size: 25mm x 66mm x 2m (1" x 2 3/4" x 6'6")

Plastex Lok

Plastex Lok edging (male)

Plastex Lok edging (male)


Supplied in 50cm (1'8") lengths. Both male and female strips are available. Comes in black and yellow. Size: 12mm x 50mm x 500mm (1/2" x 2" x 1'8")

Plastex Lok edging (female)

Plastex Lok edging (female)


Supplied in 50cm (1'8") lengths. Both male and female strips are available. Comes in black and yellow. Size: 12mm x 50mm x 500mm (1/2" x 2" x 1'8")

Plastex Lok ramped corner

Plastex Lok ramped corner


Comes in black and yellow. Size: 12mm x 50mm x 50mm (1/2" x 2" x 2")

Plastex Lok edging connector clips

Plastex Lok edging connector clips


For joining two ends of the edging together. One lug is supplied for every two pieces of edging in the relevant colour

T

arrow_left [#335] Created with Sketch.
Trackgrip

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

Aluminium edging (H: 14mm)

Aluminium edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium and powder coated yellow. Size: 14mm x 45mm x 2m (5/8" x 1 13 /16" x 6'6")

Small floor hook (H: 14mm)

Small floor hook (H: 14mm)


For securing sections of matting to the floor. Supplied in packs of 20 with screws and plugs.

TredLok

PennyLok edging (male)

PennyLok edging (male)


Supplied in 50cm (1'8") lengths. Comes in black and yellow. Size: 12mm x 50mm x 500mm (1/2" x 2" x 1'8")

PennyLok edging (female)

PennyLok edging (female)


Supplied in 50cm (1'8") lengths. Comes in black and yellow. Size: 12mm x 50mm x 500mm (1/2" x 2" x 1'8")

Tuff Spun

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

Tuff Spun Deck

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

Tuff Spun Wear

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

V

arrow_left [#335] Created with Sketch.
Vynagrip

Vynagrip and Vynagrip Plus

PVC edging (H: 14mm, W: 60mm)

PVC edging (H: 14mm, W: 60mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')

PVC edging (H: 14mm, W: 100mm)

PVC edging (H: 14mm, W: 100mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')

Aluminium edging (H: 14mm)

Aluminium edging (H: 14mm)


Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium and powder coated yellow. Size: 14mm x 45mm x 2m (5/8" x 1 13 /16" x 6'6")

Small floor hook (H: 14mm)

Small floor hook (H: 14mm)


For securing sections of matting to the floor. Supplied in packs of 10 with screws and plugs

Large floor hooks (H: 14mm)

Large floor hooks (H: 14mm)


For securing sections of matting to the floor. Supplied in packs of 10 with screws and plugs

PVC snap track (H: 14mm)

PVC snap track (H: 14mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")

Connector clips: side-to-end (H: 14mm)

Connector clips: side-to-end (H: 14mm)


For joining sections of matting together side-to-side. Supplied in packs of 10

Connector clips: dual purpose (H: 14mm)

Connector clips: dual purpose (H: 14mm)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Z

arrow_left [#335] Created with Sketch.
Zed Land

PVC snap track (H: 10mm)

PVC snap track (H: 10.5mm)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Supplied with cold welding paste. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")

Esd

ESD screw fit earthing lead


Supplied in 4.5m (14'9") lengths

PVC edging (H: 10mm, W: 50mm)

PVC edging (H: 10mm, W: 50mm)


Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')

Subscribe to our

Newsletter

Sign up to our newsletter for updates, news and events

You’ve added ${cartTotal} sample